Design for Manufacture​

Detailed development for the specific production processes and materials that will be used to make your product in volume.​

During this stage the designer should review the assembly design part by part to see if any components can be eliminated or combined with another.  Working with the manufacturer, the designer should determine the theoretical minimum quantity of parts required for the assembly. By listing out all the components in the assembly, including hardware, fittings and off the shelf components. Then the following questions should be asked:

  • Can the part be manufactured using the same material as other parts?
  • Can the part be combined without adding any costly process or tooling?
  • If combined with another part, how does that impact ease of assembly?
  • Is there any other reason that the parts couldn’t be combined with another, i.e. it has to move.

Through reduction of component part quantities it may also be possible to reduce the amount of hardware and the complexity of assembly. 

lighting prototypes
Thomod Case Study D2M
manufacturing support services

We work differently from a lot of design firms, by including the manufacturer very early on in the process, to ensure that their experience of production can inform the design throughout the development process. For us, Design for Manufacture doesn’t start when the design work is done, it is an integral part of the process, ensuring faster development schedules are achievable and an easier transition into production.

Once design for manufacture is complete, it’s time to move into tooling, sampling and the final phase of the development journey. Read more about producing a product in volume.

Let us help you bring your new product to market.

If you’re looking to develop a new product or re-design an existing range but lack the in-house capacity or expertise to make it a reality, get in touch with us today to discuss your requirements. 

product design team

You might also be interested in...

How to start with product development

The essential guide you must read before starting to develop your new product idea. Top tips and advice to help you succeed.

How to design for better profit margin

How to develop and launch new products with better profit margins, helping your business to grow and flourish!

How to protect a new product idea

Patents, registered designs or trademarks. We cover it all in this indepth article on protecting your intellectual property.

From idea

to successful


All the resources you will need:

Bonus 40min extended case-study video!